htw saar Piktogramm QR-encoded URL
Back to Main Page Choose Module Version:
XML-Code

flag

Measurement and Instrumentation Engineering II

Module name (EN):
Name of module in study programme. It should be precise and clear.
Measurement and Instrumentation Engineering II
Degree programme:
Study Programme with validity of corresponding study regulations containing this module.
Electrical Engineering, Bachelor, ASPO 01.10.2005
Module code: E302
SAP-Submodule-No.:
The exam administration creates a SAP-Submodule-No for every exam type in every module. The SAP-Submodule-No is equal for the same module in different study programs.
P211-0015
Hours per semester week / Teaching method:
The count of hours per week is a combination of lecture (V for German Vorlesung), exercise (U for Übung), practice (P) oder project (PA). For example a course of the form 2V+2U has 2 hours of lecture and 2 hours of exercise per week.
4V+2U (6 hours per week)
ECTS credits:
European Credit Transfer System. Points for successful completion of a course. Each ECTS point represents a workload of 30 hours.
7
Semester: 3
Mandatory course: yes
Language of instruction:
German
Assessment:
Examination  /  Assessed lab reports

[updated 10.03.2010]
Applicability / Curricular relevance:
All study programs (with year of the version of study regulations) containing the course.

E302 (P211-0015) Electrical Engineering, Bachelor, ASPO 01.10.2005 , semester 3, mandatory course
Workload:
Workload of student for successfully completing the course. Each ECTS credit represents 30 working hours. These are the combined effort of face-to-face time, post-processing the subject of the lecture, exercises and preparation for the exam.

The total workload is distributed on the semester (01.04.-30.09. during the summer term, 01.10.-31.03. during the winter term).
90 class hours (= 67.5 clock hours) over a 15-week period.
The total student study time is 210 hours (equivalent to 7 ECTS credits).
There are therefore 142.5 hours available for class preparation and follow-up work and exam preparation.
Recommended prerequisites (modules):
E104 Fundamentals of Electrical Engineering I
E203 Fundamentals of Electrical Engineering II


[updated 10.03.2010]
Recommended as prerequisite for:
E406 Power Electronics I
E408 Industrial Control Technology


[updated 10.03.2010]
Module coordinator:
Prof. Dr. Alexander Neidenoff
Lecturer:
Prof. Dr. Alexander Neidenoff


[updated 10.03.2010]
Learning outcomes:
Students will acquire the skills and techniques required in the area of electrical measurement and instrumentation engineering. The aim of the lectures is to teach students the fundamental ideas, principles, procedures and scope of measurement and instrumentation engineering, and how to apply them. Areas covered include basic and normalized quantities, measurement instruments, circuits and methods, and the measurement of non-electrical quantities. The methods acquired in this module provide a solid grounding for students taking the advanced modules: ‘Electrical Engineering Theory’, ‘Electronics’, ‘Systems Theory’, ‘Sensors and Actuators’, ‘Control Engineering’, ‘Signal and Image Processing’ and ‘Process Automation’.
 
Learning outcomes/skills – Lab course:
Students will consolidate and extend the knowledge they acquired in the second semester. They will acquire further knowledge and skills in the area of electrical measurement and instrumentation engineering. By developing measurement strategies, setting up measuring equipment, preparing and performing measurement series, systematically analysing the results, and critically discussing the data and the associated measurement errors, students will acquire the skills and techniques needed to solve measurement problems in electrical engineering.

[updated 10.03.2010]
Module content:
A – MEASURED QUANTITIES AND UNITS OF MEASUREMENT
A-1. Historical overview
A-2. Types of measuring signals
A-3. Measurement errors
A-4. Elements of metrology and classification of measuring systems
A-5. Standards in metrology
A-6. Historical systems of units
B-7. The international (SI) system of units
 
B – MEASURING INSTRUMENTS
B-1. Analogue measuring devices
B-2. Digital measuring instruments
B-3. Analogue and digital oscilloscopes
B-4  Logic analysers
 
C – MEASURING CIRCUITS
C-2. Balanced electrical measuring circuits
C-3. Measuring bridges
C-4. Transducers
C-5. Integrators
C-6. Rectifiers
 
D – MEASUREMENT TECHNIQUES
D-0. Introduction
D-1. Measuring electrical resistances
D-2. Measuring electric power
D-3. Measuring magnetic flux
D-4. Measuring magnetic induction
D-5. Measuring magnetomotive force and magnetic field strength
 
E – MEASURING NON-ELECTRICAL QUANTITIES
E-1. Temperature measurements
E-2. Light and radiation measurements
E-3. Measuring distances, angles and levels
E-4. Strain measurements
E-5. Measuring force, mass, acceleration, pressure and vacuum
 
F – MEASURING MAGNETIC QUANTITIES
F-0. Introduction
F-1. Measuring magnetic flux
F-2. Measuring magnetic induction
F-3. Measuring magnetomotive force and magnetic field strength
 
G – MEASURING NON-ELECTRICAL QUANTITIES
G-1. Temperature measurements
G-2. Light and radiation measurements
G-3. Measuring distances, angles and levels
G-4. Strain measurements
G-5. Measuring force, mass and acceleration
G-6. Measuring pressure and vacuum
G-7. Flow measurement
G-8. Measuring rotational speed
G-9. Specialist measuring techniques
 
Content – LAB COURSE:
The lab course units are subject to continuous revision. The units currently offered are:
 
Q1: Frequency-dependent measurement of the real and imaginary component of a complex impedance by voltage comparison. Measuring the quality factor of a coil and the attenuation of a capacitor at different frequencies. Measuring very high resistances using a static measuring technique.
 
W3: Systematic measurement errors in voltage and current measuring circuits. Temperature measurements using PT100 thermocouple elements and a radiation pyrometer. Determining the temperature coefficients of resistances with linear and non-linear characteristics. Measurement of mechanical strain, mechanical stress and torsional moments using strain gauges, a Wheatstone bridge and a self-balancing bridge.
 
 
M6 Measuring magnetic quantities. Determining the field strength in the air-gap of a magnet. Determining the magnitude and direction of the earth’s magnetic field using a magnetic search coil and flux meter. Measuring magnetic potential differences (change in magnetomotive force) using a Rogowsky coil.
 
F1: Measuring the spectral composition of different signal waveforms with an FFT analyser. Measuring the dependence of an amplifier’s total harmonic distortion on its output power. Determining the sound interference products generated in the sound radiation from a loudspeaker.
 
S1: Measuring different signal transfer functions in the LF and HF regions.
Determining the carrier frequency and amplitude of medium-wave radio transmitters using a spectral analyser and a long-wire antenna. Determining the attenuation characteristics of various types of cables as a function of frequency.
 
S2: Determining the effective bandwidth of the tracking filter of a spectral analyser. Measuring the dynamic range and the signal-to-noise ratio of an active network.


[updated 10.03.2010]
Teaching methods/Media:
Class teaching during the introductory sessions, lab instructions, lecture notes, overhead transparencies, video projector

[updated 10.03.2010]
Recommended or required reading:
Standard textbooks (available from retail book shops):
Becker, Wolf / Bonfig, K.W / Hölng, Klaus. Handbuch Elektrische Messtechnik. Hüthig ISBN 3-7785-2769-X, 957 pages, €76
Felderhoff, Rainer/Freyer Ulrich/Mettke, Manfred: Elektrische und elektronische Messtechnik. Hanser Verlag  ISBN 3-446-19227-1, 418 pages, €29.90
Lerch, Reinhard: Elektrische Messtechnik. Springer-Lehrbuch  ISBN 3-540-21870-X,  559 pages, €39.95
Mühl, Thomas. Einführung in die elektrische Messtechnik. Teubner ISBN 3-8351-0094-7, 278 pages, €29.90
Pfeiffer, Wolfgang. Elektrische Messtechnik. VDE ISBN 3-8007-2316-6, 352 pages, €26.60
 
Other textbooks and workbooks (library stock):
Cooper, William; Helfrich, Albert: Elektrische Messtechnik – Informationstechnologie. ISBN 3-527-26623-2
Haug, Albert; Haug, Franz: Angewandte Elektrische Messtechnik. Vieweg  ISBN 3-528-14567-6
Hoffmann, Jörg (Herausgeber): Taschenbuch der Messtechnik. Fachbuchverlag ISBN 3-446-18834-7, 635 pages
Schrüfer, Elmar: Elektrische Messtechnik Studienbücher der technischen Wissenschaften. ISBN 3-446-17955-0
Schwetlick: PC-Messtechnik. ISBN 3-528-04948, 408 pages
Stöckl, Melchior; Winterling, Karl H: Elektrische Messtechnik. ISBN 3-519-46405-5
 
Lecture notes:
Neidenoff, Alexander. Elektrische Messtechnik. 1. Teil [Electrical Measurement and Instrumentation Engineering – Part 1], approx. 220 pages
Neidenoff, Alexander. Elektrische Messtechnik. 2. Teil [Electrical Measurement and Instrumentation Engineering – Part 2], approx. 250 pages
Neidenoff, Alexander. Praktikum Elektrische Messtechnik. 2. Teil [Measurement and Instrumentation Engineering Lab Course – Part 2], approx. 320 pages


[updated 10.03.2010]
 
[Mon Dec 23 11:48:14 CET 2024, CKEY=emid, BKEY=e, CID=E302, LANGUAGE=en, DATE=23.12.2024]