htw saar QR-encoded URL
Back to Main Page Choose Module Version:
XML-Code

flag

Basics of Component Dimensioning

Module name (EN):
Name of module in study programme. It should be precise and clear.
Basics of Component Dimensioning
Degree programme:
Study Programme with validity of corresponding study regulations containing this module.
Mechanical and Process Engineering, Bachelor, ASPO 01.10.2019
Module code: MAB_19_A_2.03.GBD
SAP-Submodule-No.:
The exam administration creates a SAP-Submodule-No for every exam type in every module. The SAP-Submodule-No is equal for the same module in different study programs.
P241-0253
Hours per semester week / Teaching method:
The count of hours per week is a combination of lecture (V for German Vorlesung), exercise (U for Übung), practice (P) oder project (PA). For example a course of the form 2V+2U has 2 hours of lecture and 2 hours of exercise per week.
2V+2U (4 hours per week)
ECTS credits:
European Credit Transfer System. Points for successful completion of a course. Each ECTS point represents a workload of 30 hours.
5
Semester: 2
Mandatory course: yes
Language of instruction:
German
Assessment:
Written exam (180 minutes)

[updated 15.04.2024]
Applicability / Curricular relevance:
All study programs (with year of the version of study regulations) containing the course.

MAB_19_A_2.03.GBD (P241-0253) Mechanical and Process Engineering, Bachelor, ASPO 01.10.2019 , semester 2, mandatory course
MAB_24_A_2.03.GBD Mechanical and Process Engineering, Bachelor, SO 01.10.2024 , semester 2, mandatory course
Workload:
Workload of student for successfully completing the course. Each ECTS credit represents 30 working hours. These are the combined effort of face-to-face time, post-processing the subject of the lecture, exercises and preparation for the exam.

The total workload is distributed on the semester (01.04.-30.09. during the summer term, 01.10.-31.03. during the winter term).
60 class hours (= 45 clock hours) over a 15-week period.
The total student study time is 150 hours (equivalent to 5 ECTS credits).
There are therefore 105 hours available for class preparation and follow-up work and exam preparation.
Recommended prerequisites (modules):
MAB_19_A_1.02.TMS Engineering Mechanics - Statics
MAB_19_A_1.03.WSK Materials Science with Lab Exercises


[updated 24.07.2024]
Recommended as prerequisite for:
MAB_19_4.2.1.40
MAB_19_M_3.05.MK1 Machine Elements and Design 1
MAB_19_M_3.06.BTD Dimensioning Components
MAB_19_M_4.03.MK2
MAB_19_M_4.04.MK2 Engineering Design (with Project)
MAB_19_PE_5.11.FEM The Finite Element Method (FEM)


[updated 04.07.2024]
Module coordinator:
Prof. Dr.-Ing. Ramona Hoffmann
Lecturer: Prof. Dr.-Ing. Ramona Hoffmann

[updated 28.05.2018]
Learning outcomes:
After successfully completing this module, students will be able to:
 
- name and understand the basic load cases by being able to apply them in different contexts in order to recognize their significance for structural strength.
 
- apply real components to mechanical models and abstract them by developing solutions to better understand complex relationships.
 
- identify, analyze and calculate the behavior of components under the basic loads by performing safety verifications in order to be able to assess component dimensions.
 
- dimension simple components under different loads by analyzing practical applications to determine the required component dimensions.
 
- formulate questions in front of a larger group and actively contribute to the discussion by promoting the learning process through interactive discussions and group work.

[updated 30.06.2024]
Module content:
Introduction and classification: Tasks of component dimensioning and elastostatic principles
The basic load cases
Tension and compression: tension, elongation, material law, thermal expansion, variable stresses, structures of equal strength.
The bar as model for real components.
Statically determinate bar systems, statically indeterminate bar systems.
Surface contact under compressive force: Bearing stress / surface pressure
Thrust / transverse shear / shearing
Bending: Straight beam, moments per unit area, bending line, beam of equal strength, inclined bending, transverse shear
The beam as model for real components
Torsion: round full cross sections, hollow cross sections, arbitrary cross sections, behavior of open cross sections
 
Bending of straight bars.


[updated 15.04.2024]
Recommended or required reading:
Groß, Hauger, Schröder, Wall: Technische Mechanik 2 – Elastostatik, Springer-Verlag.
Holzmann, Meyer, Schumpich: Technische Mechanik – Festigkeitslehre, Springer Vieweg Verlag.
Läpple: Einführung in die Festigkeitslehre, Vieweg+Teubner Verlag.
Böge: Technische Mechanik, Springer Vieweg Verlag.
Hibbeler: Technische Mechanik 2 Festigkeitslehre, Pearson Verlag.
Kabus: Mechanik und Festigkeitslehre, Hanser Verlag.


[updated 15.04.2024]
 
[Mon Dec 23 02:21:26 CET 2024, CKEY=mgdba, BKEY=m2, CID=MAB_19_A_2.03.GBD, LANGUAGE=en, DATE=23.12.2024]